Fuso FEG-881, Operation Manual

Page: 70 / 112

- 66 -
Setup Items Input Range Description
1.AUTO CENTER ON/OFF To indicate that the own ship is in the very center of
the display all the time.
2.SHIP MARK SIZE Large/Small To set up the size of the own ship shown in the
display.
3.RADIUS SET 0.00 ~ 9.99 A function to indicate the radius in red circle, making
the own ship as a staring point. This is beneficial
when the own ship passes by any area of many
islands or passes by any narrow waterways.
It is normally set up at 1.00 NM or 0.5 NM. 0.00 NM
is advisable in case of OFF.
4.SMOOTHING
SET The set up
differs from
the vessel
type. If the status of GPS receipt or the
measured position value are poor, this function can
work on smoothing the widely changing values of the
lat/log, ship speed, bearing, finally to display them.
The more value it is set up, the more stable it is as
the stronger smoothing is achieved.
5.LAT/LON
CORRECTION ±00.00 ~
±99.99 If any value error of the current position, the log/lat.
can be corrected per second, minute with this
function.
6.HEADING DISPLAY ON/OFF This function displays the bearing line on the screen.
7.HEADING SIZE Large/Mid/Small To select the bearing size on the plotter display.
8.HEADING COLOR Red/Green/Blue To select the bearing color on the plotter display.
9.HEADING SHAPE Thick/Thin To select the bearing line thickness on the plotter
display.