![Furuno SFD-1010 Operator'S Manual Download Page 112](http://html1.mh-extra.com/html/furuno/sfd-1010/sfd-1010_operators-manual_2350505112.webp)
Key control:
1.
Press the
MENU/ESC
key to open [MENU].
2.
Select [DISPLAY] with the arrow keys, then press the
ENTER
key.
3.
Select [ACCU-FISH] with the arrow keys, then press the
ENTER
key.
4.
Select [ACCU-FISH] in the lower level with the arrow keys, then press the
ENTER
key.
The [Off]/[On] selection box appears.
5.
Select [Off] or [On] with the arrow keys, then press the
ENTER
key.
6.
Select [Fish Info] with the arrow keys, then press the
ENTER
key.
The [Off]/[Fish Size]/[Water Depth] selection box appears.
7.
Select [Off], [Fish Size] or [Water Depth] with the arrow keys, then press the
ENTER
key.
8.
Select [Info Size] with the arrow keys, then press the
ENTER
key.
The [Small]/[Large] selection box appears.
9.
Select [Small] or [Large] with the arrow keys, then press the
ENTER
key.
10. Select [Fish Symbols] with the arrow keys, then press the
ENTER
key.
The [Off]/[Striped]/[Solid]/[Circle]/[Square] selection box appears.
11. Select [Off], [Striped], [Solid], [Circle] or [Square] with the arrow keys, then press
the
ENTER
key.
12. Select [Symbols Area] with the arrow keys, then press the
ENTER
key.
The [Dual]/[HF]/[LF] selection box appears.
13. Select [Dual], [HF] or [LF] with the arrow keys, then press the
ENTER
key.
14. Press the
MENU/ESC
key to close [MENU].
3.15.2 Calibration of fish size values
Calibration is required when the size of fish you actually caught and the indicated value
do not match.
Touch control:
1.
Press the
MENU/ESC
key to open [MENU].
2.
Tap [SYSTEM].
3.
Tap [Calibration].
4.
Tap [Fish Size] and drag the slider bar displayed below the menu, or tap [+] or [-] to
set the calibration level of fish size.
5.
Tap [x] on the title bar to close [MENU].
Key control:
1.
Press the
MENU/ESC
key to open [MENU].
2.
Select [SYSTEM] with the arrow keys, then press the
ENTER
key.
3.
Select [Calibration] with the arrow keys, then press the
ENTER
key.
4.
Select [Fish Size] with the arrow keys, then press the
ENTER
key.
5.
Set the calibration level of fish size with the arrow keys, then press the
ENTER
key.
3-20
3
.
FISH FINDER