manualshive.com logo in svg

Furuno RC-1500-1T, Operator'S Manual

Share
Download
Furuno RC-1500-1T Operator'S Manual Download Page 374

6-4

Testing Distress Button

The DISTRESS button on the IC-302 may be tested without trans-
mitting the distress signal as follows:

1. Press [F7] to display the Options menu.

2. Press [6] to display the Test menu.

Figure 6-5 Test Menu

3. Press [4].

4. Press [Enter]. The Distress Alert Button Test mode screen appears.

Figure 6-6 Distress alert button mode screen

5. Open cover on DISTRESS button.

6. Press the DISTRESS button 4 seconds.

7. Confirm that the IC-302 sounds the audible alarm.

8. Close the cover on DISTRESS button.

9. Press any key to escape.

Summary of Contents for RC-1500-1T



































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands