Furuno RC-1500-1T, Operator'S Manual

Page: 297 / 418

2-15
21. Press [Esc] to open the update window.
Setup
EGC Setup
Receive EGC Area
Additional Position
Navarea
Fixed Area
Waypoint (from NAV Equipment)
NAVTEX
Station Code
Type of Message (Can’t reject other report)
Ice reports
Meteo. forecasts
Pilot service
DECCA messages
LORAN messages OFF
OFF
OFF
OFF
OFF OMEGA messages
SATNAV messages
Other navaid msg
QRU (no message) OFF
OFF
OFF
OFF
: :
OFF
Update
Yes No
Figure 2-26 EGC setup screen, update window
22. Press [Enter] to select “Yes” and register all EGC settings.
23. Press [Esc] to return to the standby display.
Programming EGC channels
The EGC Channel List in the Setup menu stores EGC channels.
There are currently four EGC channels, one for each satellite. These
four channels are pre-programmed into the unit and marked in the
EGC Channel List with asterisks. When more EGC channels become
available you can add them to the list.
1. Press [F8] to display the Setup menu.
2. Press [9] to display the Configuration menu.
3. Press [3] to display the EGC Channel List.
File Edit Transmit EGC Reports Logs Options Setup Position StopAlarm
Setup
Configuration
EGC Channel List
11080* 12580* 10840* 11088*
ENT: set ESC: quit
Figure 2-27 EGC channel list
4. Current EGC channels are marked with an asterisk. These chan-
nels cannot be changed.
5. With the arrow keys place the cursor where there is no data en-
tered.