manualshive.com logo in svg

Furuno RC-1500-1T, Operator'S Manual

Share
Download
Furuno RC-1500-1T Operator'S Manual Download Page 144

7-4

Default: ABLE

**

 Auto ack setup 

**

COMPLY TYPE

: ABLE

UNABLE REASON :

NO REASON GIVEN

POSITION CALL

: OFF

POLLING CALL

: ON

 

ABLE

UNABLE

Choose ABLE or UNABLE as automatic 
acknowledgement reply to Individual, Position 
and Polling messages.

Note: Automatic acknowledge is automatically 

disabled when Rx message contains error, 
as required by law. Further, automatic 
acknowledge is disabled in case of OFF 
HOOK.

Automatic acknowledge of Position or 
Polling request is not available when 
UNABLE is selected.

Default: NO REASON

NO REASON

BUSY

EQUIP DISABLED

MODE NOT USABLE

CH NOT USABLE

Sets reason for UNABLE.

Note: This menu is the same as manual 

acknowledgement. EQUIPMENT 
DISABLED is shown in messages when 
EQUIP DISABLED is selected.

Default: ON

Overrides/follows AUTO ACK setting 
in case of position.
OFF: Disables automatic 

acknowledgement of position 
request.

ON: Enables automatic 

acknowledgement of position 
request.

[ENT] key

[ENT] key

[ENT] key

[ENT] key

ON

OFF

Default: ON

Overrides/follows AUTO ACK setting 
in case of polling.
OFF: Disables automatic 

acknowledgement of polling 
request.

ON: Enables automatic 

acknowledgement of polling 
request.

ON

OFF

    or   
to set.

    or   
to set.

    or   
to set.

    or   
to set.

Summary of Contents for RC-1500-1T



































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands