Furuno RC-1500-1T Operator'S Manual Download Page 159

Page: 159 / 418

8-5

6. Select an appropriate frequency and press the [ENT] key, and the display changes as below.

***

Send message

***

CALL TYPE : TEST

COAST ID

001234567

PRIORITY : SAFETY

DSC FREQ :

2187.5 KHZ

GO TO ALL VIEW

7. Press the [CALL] key to send the test call (transmission time: about 7 sec.). The display

shows "Test call in progress!" while the test call is being transmitted.

Test
call in progress!

DSC FREQ :

2187.5 KHZ

TIME TO GO : 7S

TO COAST :

001234567

SAFETY

8. After the test call has been sent, the following message appears.

Waiting for test
acknowledgement.

DSC FREQ :

2187.5 KHZ

TIME TO GO : 4M12S

FROM COAST

001234567

SAFETY

9. One of the following displays appears. (“No response! Try calling again?” appears when the

timer counts down to zero, meaning no response from coast station.)

No response!
Try calling again?

DSC FREQ :

2187.5 KHZ

FROM COAST:

001234567

SAFETY

Test acknowledge
call received.

FROM COAST:

001234567

SAFETY

NO INFORMATION

STOP ALARM

CALL AGAIN

Test acknowledge received No response to test call

Summary of Contents for RC-1500-1T



































































































































































































































































































































































































































Search results

Summary of Contents for RC-1500-1T

Reviews:

Brands by name

Popular brands

Furuno RC-1500-1T, Operator'S Manual

Search results

Summary of Contents for RC-1500-1T

Reviews:

Brands by name

Popular brands