manualshive.com logo in svg

Furuno RC-1500-1T, Operator'S Manual

Share
Download
Furuno RC-1500-1T Operator'S Manual Download Page 124

4-48

5.  One of the following messages appears.

PSTN call connected.

DSC FREQ   : 

12577.5 KHZ

TO COAST   :

001234567 

TEL NO. 

: 

1234567890123456 

TELEPHONE       CH 12001

PSTN call connected                        PSTN connection call  in progress                             PSTN end of call

PSTN  connection
call in progress!

TIME TO GO:

    25S

DSC FREQ   

  : 

 12577.5 KHZ

FROM COAST : 

001234567 

TEL NO.     : 

1234567890123456

PSTN end of call
in progress!

TIME TO GO:

      7S

TO COAST : 

001234567 

TEL NO. 

: 

1234567890123456 

TELEPHONE       CH 12001
DSC FREQ   : 

12577.5 KHZ

6.  Do one of the following depending on the message shown at step 5.

PSTN call connected:

 Your phone rings; pick up the handset and communication with

receiving station.

PSTN connection call in progress!

: This means coast station has switched DSC

frequency. (If the channel cannot be used the message “PSTN end of call in progress!”
appears. In this case, start this procedure again.) If the channel assigned is OK the
message Waiting for acknowledgment.” appears.

PSTN end of call in progress!

: The channel could not be used. Press the [CANCEL]

key to return to the DSC standby screen. Repeat this procedure to send the call again.

4.9.4

PSTN call disconnection, receiving charge information

              (ship disconnects line)

1.  After hanging up the handset or pressing the [CANCEL] key to complete your call the display

shows the following message.

PSTN end of call 
 in progress!

TIME TO GO:

    8S

TO COAST : 

001234567 

TEL NO.      : 

1234567890123456 

DSC FREQ   

  : 

12230.0 KHZ

2.  After the call is sent one of the following messages appears. (For time out the message

“PSTN end of call in progress!” appears. After the timer counts down to zero “Waiting for
charge information.” appears.)

Waiting for 
charge information.

TIME TO GO:

    20S

FROM COAST : 

001234567 

TEL NO.      : 

1234567890123456 

DSC FREQ   

  : 

12230.0 KHZ

PSTN end of call 
 in progress!

TIME TO GO  :                    8S

TO COAST  : 

001234567 

TEL NO.      : 

1234567890123456 

DSC FREQ      : 

        12230.0 KHZ

Summary of Contents for RC-1500-1T



































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands