Furuno RC-1500-1T, Operator'S Manual

Page: 215 / 418

5-9
Transmitting message directly (DIRTLX)
The procedure which follows shows how to transmit a Telex mes-
sage directly to a station.
1. Execute "Calling a Station" on page 5-3.
2. After GA+ and DIRTLX appear on your display, type Receiv-
ing station's Telex number.
3. Singapore coast station sends its Telex number. Type receiving
station's answerback code.
4. Type MSG+?
5. Type your message.
6. Type WRU. Receiving station and your station mutually ex-
change answerback codes automatically.
7. Type KKKK (end code) at end of message. Your answerback
code, receiving station's Telex number and communication time
appear on your display.
8. Receiving station sends GA+?.
To send another message by DIRTLX, start at step 2. To finish,
type BRK+
9VG SERADIO RS 55908 UGOX X
GA +?
DIRTLX07205644325 = +
TRY AGAIN OR USE 'OPR'
GA +?
DIRTLEX07205
MOM07205
5644325FURUNO J
MSG +?
12345 FURUNO J
TO FURUNO
THIS IS A TEST MESSAGE FROM ab cdefgh ijkl IN KOBE.
WRU
5644325FURUNO J +?
54321 ABCD N
KKKK
55908 UGOX X
9VG SERADIO RS
TIME: 29. 5. 96 7:49
SHIP: 555908 UGOX X
SUBSCR:07205
DURATION:1.4MIN
GA +?
BRK +
Exchange answerback codes
After GA+ appears type Receiving station's
Telex number.
Receiving station's Telex no.
If there is a mistake in the number coast station
asks you to reenter number.
Type receiving station's answerback code.
Prepare to send message.
Type message.
BRK + disconnects the communication line.
To send another message type DIRTLX instead of BRK +.
End code. Your ship's answerback code, receiving station's
Telex no. and communication time appear.