Furuno RC-1500-1T, Operator'S Manual

Page: 317 / 418

3-3
When the recipient receives a message with both addressee code and
password, he must enter the password to view contents of the mes-
sage.
Editor menu setup
The Editor menu sets the parameters of the text editor.
1. Press [F8] to display the Setup menu.
2. Press [3] to display the Editor Setup menu.
Figure 3-5 Editor setup menu
3. Figure 3-5 shows the default editor setup settings. To change set-
tings, select item with arrow keys, press [Enter] to open selection
window, and select settings with arrow keys. After selecting set-
tings, press [Enter].
Text Mode:
Select “Telex” or “ASCII”.
Edit Mode:
Select “Insert” (insert character at cursor location)
or “Overwrite” (write over character at cursor lo-
cation).
Word Wrap: Turns on/off hyphenation at end of line.
Line No.: Turns line number display on or off.
Tab Width: Sets horizontal tab width; 2, 4 or 8 tabs per line.
Column Width: Select Telex (69 Fixed) or ASCII (40 to 80).
Cursor Type: Selects cursor appearance, either (Block) or un-
derline.