manualshive.com logo in svg

Furuno RC-1500-1T, Operator'S Manual

Share
Download
Furuno RC-1500-1T Operator'S Manual Download Page 357

4-27

4. To print the log, press and hold down [Ctrl] and press [P].

 “Now printing” appears on the screen.

To stop printing, press [Esc].

display log description

S/R:

Send or Receive message

Message No.:

Message no. or file name

Type:

Currently, TELEX, PSTN, PSDN or SPEC (2-
digit code service).

Pri:

Normal or distress

Date:

Date message was received (or transmitted).

Time:

Time message was received (or transmitted).

LES:

ID of LES which handled the message

Station:

Transmitting station name. Blank for unregistered
station or receive message.

Size:

Size of message in bytes

Cond:

Transmission results. Blank if receive message.

Success:

Successful transmission

Fail:

Failed transmission

Rejected:

Message rejected by LES

Automatic printing of display log

The Display Log can be automatically printed every 24 hours.

1. Press [F8] to display the Setup menu.

2. Press [6] to display the Auto Mode Setup menu.

Figure 4-38 Auto mode setup menu

3. Press [Enter] to open the selection window of Auto Log Print.

4. Set Auto Log Print to ON.

5. Press [Enter] to close the selection window.

6. Press [Esc] twice.

Summary of Contents for RC-1500-1T



































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands