Furuno GS-100, Operator'S Manual

Page: 36 / 157

3. SETTINGS
3-8
3.6 Other Setting Menus for Antenna Unit
3.6.1 How to reset the sensor
You can reset the sensor (antenna unit) when experiencing antenna trouble.
1. Press the MENU ESC key to open the main menu.
2. Select [6 Sensor Setting]
then [4 Other].
3. Select [1 App Reset].
The confirmation message appears.
4. Select [1 Yes]. The sensor restarts.
3.6.2 How to clear the sensor settings
Note: This function is for a serviceman.
You can clear the sensor (antenna sensor) settings when experiencing antenna trou-
ble.
1. Press the MENU ESC key to open the main menu.
2. Select [6 Sensor Setting] then [4 Other].
3. Select [2 Clear Setting]. The confirmation message appears.
4. Select [1 Yes]. The message "Processing..." appears on the screen then the sen-
sor settings are cleared.
5. Turn the power off then on.
3.6.3 How to set the time for dead reckoning
You can set the dead reckoning interval to use with the internal rate gyro sensor to
calculate bearing when the GNSS signal is lost.
1. Press the MENU ESC key to open the main menu.
2. Select [6 Sensor Setting] then [4 Other].
3. Select [3 Dead Reckoning Time].
4. Select [1 1 min], [2 2 min], [3 3 min], [4 4 min] or [5 5 min].
5. Press the
MENU ESC key to close the main menu.