Furuno GS-100, Operator'S Manual

Page: 5 / 157

SAFETY INSTRUCTIONS
iii
WARNING
CAUTION
Turn off the power at the
switchboard before beginning the
installation.
Fire or electrical shock can result if the
power is left on.
Safety Instructions for the Installer
Be sure that the power supply is
compatible with the voltage rating
of the equipment.
Connection of an incorrect power
supply can cause fire or damage the
equipment.
Ground the equipment to prevent
electrical shock and mutual
interference.
Observe the following compass safe
distances to prevent interference to a
magnetic compass:
Standard
compass Steering
compass
Antenna
Unit
Display
Unit
Junction
Box
Type
GS-1001B
GS-1002
GS-1003
0.70 m 0.45 m
0.60 m 0.40 m
0.75 m 0.50 m
Display
Unit
(option)
DS-600
0.60 m 0.40 m
Have a qualified serviceman do the
installation.
Only qualified personnel should work
inside the equipment.
Use the specified power cable.
Fire can result if an incorrect cable is
used.
The mounting location for the units
must satisfy the following
conditions:
- Away from rain and water splash
- Out of direct sunlight
- Away from air conditioner vents
- Moderate and stable in temperature
and humidity