Furuno GS-100, Operator'S Manual

Page: 25 / 157

2. DISPLAYS
2-5
3-axis speed display
The circle at the center of the display shows the own ship’s speed.
2.4 Integrity Display
The integrity display, available in the THD mode, provides information about GNSS
satellite position and signal quality. There are three integrity displays: GNSS, graph
for satellite angle and graph for signal noise ratio.
Use the cursorpad ( S or T ) to change the displays, in the following sequence.
*: These triangles are displayed in the following conditions:
• Current direction: Selected [Current] in the [Window2] menu.
• Wind velocity:
Selected [Wind] in the [Window3] menu.
• Drift angle: Selected [Drift] in the [Window5] menu.
**: When the current indication method is [Flow from] (set on the [Current] menu, see
paragraph 3.1.2), the blue icon for current direction turns 180° and is displayed outside
of the circle.
***: The speed value at the position where the antenna is installed is more accurate.
N, E, S, W:
Bearing scale
Stern
Bow
Picture
of ship
Bow velocity
Wind velocity* (Magenta)
N
Broadside speed
at stern position***
Speed for
heading
Drift angle*
(Brown
）
Current direction*
/
** (Blue)
Broadside speed at
bow position***
Heading velocity
Stern velocity
GNSS
Graph: signal
noise ratio
Graph:
satellite angle
: Press the ▲ key.
: Press the ▼ key.