Furuno GS-100, Operator'S Manual

Page: 65 / 157

6. BERTHING DISPLAY
6-11
6.7 Berthing Line
Berthing lines, which can be used to assist in berthing operations, can be created and
edited at the GS100. The saved lines can be sent to the DS-600 for display. A maxi-
mum of 100 lines can be saved in the GS-100 and each line can have up to three
points.
6.7.1 How to register a berthing line
1. Press the MENU ESC key to open the main menu.
2. Select [7 System Setting] then [5 Berthing Line].
*: Press the TRKG MODE
key to switch between
SOG and STW.
3-axis speed data*
from the GS-100 in
NAV data window
The data in dashed
rectangle can not
be displayed.
3-axis speed data in NAV data (3 axis in NAV)
Long-push ENT .
Long-push ENT .
3-axis speed
data*
3-axis speed
data*
NAV data
The data in dashed
rectangle can not
be displayed.
3-axis speed data and NAV data (3 axis and NAV)
Long-push ENT .
3-axis speed data, NAV data OFF (3 axis)