Furuno FV-110GX, Operator'S Manual

Page: 98 / 188

Configuration with the web interface
5-34
• Yes to allow access
• No to block access to the settings. Then the pages are read-only, changes cannot be
made by non-administrator users.
Most of the items in the list are self-explaining, the others are explained in the
following table.
3. Click Apply .
A message at the top of the page saying that the page requires administrator rights informs
the guest user that access is denied.
To import and export a system configuration
If you need to reuse a configuration in another FV-110GX system, you can save the
current configuration to a configuration file. This file can then be loaded into another FV-
110GX or be used as backup. The configuration file contains all the settings you have
entered during system setup: satellite profiles, modem profiles, LAN setup, blocking
zones, etc.
Figure 5-26: Web interface: ADMINISTRATION, Export/import configuration
Item Description
Change network Change IP configuration of the LAN connectors of the ACU. For
further information see
To configure the LAN network on page 5-
23.
Change e-mail settings Change e-mail addresses for sending reports. For further
information see E-mail setup on page 5-25.
Modify antenna data Only used during service and maintenance when you exchange
modules in the antenna.
Control modem Allow to reset or power cycle the modem.
Table 5-14: Selected items in the list with user permissions
Note
The antennas involved must have the same software version.
Browse...