Furuno FV-110GX, Operator'S Manual

Page: 68 / 188

Heading input and position system
5-4
5.2 Heading input and position system
Before the FV-110GX can be used you must select the heading input and the positioning
system.
Figure 5-4: Web interface: SETTINGS, Navigation (example)
To set the heading input and the position system, do as follows:
1. Go to the page SETTINGS > Navigation .
2. Select the desired heading input, see the following table.
Important
Make sure that the modem is switched off at this point. Switch on the
modem after the cable calibration.
Important
You must be logged on as an administrator. See Import a configuration from
file, see section above. on page 5-35.
Heading input Description
External Heading input from the vessel’s gyro compass (default).
If there is no heading input due to failure, alarms are raised and the
antenna continues in gyro-free mode. When heading input is available
again and a new acquisition is made, alarms are cleared. See also
Operation in gyro-free mode on page 5-13.
Table 5-1: Heading input options