Furuno FV-110GX, Operator'S Manual

Page: 157 / 188

Supported commands
C-3
C.2.1 config
C.2.2 demo
C.2.3 exit
C.2.4 help
Command Description
config
Shows the sub commands available, including a short
description.
config pending_list
Shows the number of pending changes.
config current_list
Shows the values for the current satellite profile,
antenna and some tracking information.
config discard
Discards all pending changes.
config activate
Use this command to save and activate the pending
changes in the FV-110GX system.
Table C-2: UCLI command:
config
Command Description
demo start
Starts a demo pattern where the antenna will turn azimuth,
elevation and cross elevation until it receives the command
demo stop.
demo stop
Stops the antenna demo pattern.
demo reset
Resets the antenna to angle 0.
Table C-3: UCLI command:
demo
Command Description
exit
Exits the connection to the FV-110GX system.
Table C-4: UCLI command:
exit
Command Description
help
Shows a list of commands available, including a short
description.
help satellite
Shows the sub commands and description for the command
satellite
.
Table C-5: UCLI command:
help