FULTON PHW 1000, Installation, Operation And Maintenance Manual

Page: 91 / 94

Fulton Heating Solutions, Inc. -- PHW Manual -- 2010-0713
Page 91
Standard Warranty for Fulton Pulse Boilers
Warranty Valid for Models PHW with Duplex Stainless Steel Exhaust Pipes
Ten (10) Year (120 Month) Thermal Shock Warranty
Fulton Heating Solutions guarantees the Pulse hot water pressure vessel against thermal shock for a period of ten (10)
years when the boiler is installed as a closed loop hot water boiler and is operated per the Installation and Operation
Manual. This guarantee will cover damage due to thermal shock, such as leaks in the heat exchanger. This guarantee does
not cover damage due to corrosion, scaling, sooting or improper installation or operation. The inlet and outlet water
temperature differential across the boiler cannot exceed 100°F.
Ten (10) Year (120 Month) Prorated Flue Gas Condensate Corrosion and Material and Workmanship Warranty
The pressure vessel is covered against flue gas condensate corrosion and defective material or workmanship for a period of
ten (10) years from the date of shipment from the factory according to the schedule below. Fulton will repair or replace
F.O.B. factory any part of the equipment, as defined above, provided this equipment has been installed, operated and
maintained by the buyer in accordance with approved practices and recommendations made by Fulton. The commissioning
agency must also successfully complete and return the equipment Installation and Operation Checklists to Fulton’s Quality
Assurance department. This warranty covers any failure caused by defective material or workmanship; however, waterside
corrosion or scaling is not covered. Therefore, it is imperative that the boiler be installed in a closed loop as outlined in the
Installation and Operation Manual.
Year Prorated Schedule
0-7 100%
8 50%
9 30%
10 20%
Parts Warranty
Fulton will repair or replace F.O.B. factory any part of the equipment of our manufacture that is found to be defective in
workmanship or material within one (1) year of shipment from the factory provided this equipment has been installed,
operated and maintained by the buyer in accordance with approved practices and recommendations made by both Fulton
and the component manufacturers and the commissioning agency has successfully completed and returned the equipment
Installation and Operation Checklists to Fulton’s Quality Assurance department.
General
Fulton shall be notified in writing as soon as any defect becomes apparent. This warranty does not include freight, handling
or labor charges of any kind.
These warranties are contingent upon the proper sizing, installation, operation and maintenance of the boiler and peripheral
components and equipment. Warranties valid only if installed, operated, and maintained as outlined in the Fulton Installation
and Operation Manual.
No Sales Manager or other representative of Fulton other than the Quality Manager or an officer of the company has
warranty authority. Fulton will not pay any charges unless they were pre-approved, in writing, by the Fulton Quality Manager.
This warranty is exclusive and in lieu of all other warranties, expressed or implied, including but not limited to the implied
warranties of merchantability and fitness for a particular purpose. Fulton shall in no event be liable for any consequential or
incidental damages arising in any way, including but not limited to any loss of profits or business, even if the Fulton
Companies has been advised of the possibility of such damages. Fulton’s liability shall never exceed the amount paid for the
original equipment found to be defective.
Excessive cycling will reduce the life of ANY boiler. Verify that your system is properly designed and check cycling rate
according to maintenance procedures listed in this manual.
To activate the warranty for this product, the appropriate commissioning sheets must be completed and returned to the
Fulton Quality Assurance department for review and approval.
2010-0311