Safety Information
TRACKMASTER
3-2
FVX328 Series Owner’s Manual
May, 2008
•
Operator should be aware of elevation malfunction and be prepared to assist patient
and stop treadmill if necessary.
•
Operator should always be aware of improper treadmill response to commands.
•
Check treadmill before use. This includes:
–
Check power cord connection
–
Check emergency stop button for proper operation.
–
Check interface cable to ensure it is secure
–
Verify ECG communication is correct.
•
Verify operator knows how to stop the treadmill in the event of malfunction or
emergency.
•
Make operator aware if treadmill is not responding properly to commands.
•
Keep all cords clear of operator to avoid trip hazards.
•
Operator should not wear loose fitting nylon material when exercising on treadmill to
avoid generating ESD.
•
Operator needs to be aware of and note any components of the treadmill that are
loose.
•
Do not allow moisture or oils to accumulate on treadmill, creating a slip hazard.
•
Operator should be aware of elevation malfunction and be prepared to assist patient
and stop treadmill if necessary.
•
Operator should always be aware of improper treadmill response to commands.
•
Check treadmill before use. This includes:
–
Check power cord connection and location for hazardous pinch points.
–
Check emergency stop button for proper operation.
–
Check interface cable to ensure it is secure and not cut or pinched.
–
Verify ECG communication is correct.
•
Verify operator knows how to stop the treadmill in the event of malfunction or
emergency.
•
Make operator aware if treadmill is not responding properly to commands.
•
Keep all cords clear of operator to avoid trip hazards.
•
Operator should not wear loose fitting nylon material when exercising on treadmill to
avoid generating ESD.
•
Operator needs to be aware of and note any components of the treadmill that are
loose.
•
Do not allow moisture or oils to accumulate on treadmill, creating a slip hazard.
Serious injury or death could result from electric shock. To reduce the possibility of
electric shock, carefully observe the following precautions.
•
Connect the treadmill only to a dedicated, properly grounded outlet. See “Grounding
Instructions” on the next page.
•
Always unplug the treadmill from the electrical outlet before cleaning it.
•
To disconnect the treadmill, set the power switch to the OFF position, and remove
the plug from the outlet. When the power is off, the green light on the power
switch is dark.
•
Never operate the unit with a damaged power cord or plug.
If the power cord is damaged, it must be replaced by a qualified service provider.
Contact your distributor.
Use only TRACKMASTER
®
replacement parts. Using other parts may void your
warranty and may cause your treadmill to malfunction.
Summary of Contents for TRACK MASTER FVX328
