Full Vision TRACK MASTER FVX328, Owner'S Manual

Page: 23 / 79

TRACKMASTER Assembly and Setup
May, 2008 FVX328 Series Owner’s Manual
5-5
Final Setup Belt Tension Adjustment
When you operate your treadmill for the first time, you may need to adjust the tension of the
belt to conform to your floor. This looseness is noticeable when the belt tends to hesitate or
stick. If the belt is loose and slipping (See Preventative Maintenance 6-4) for adjustment
procedure.
CAUTION Improper adjustment could cause the treadmill to hesitate and cause a trip and fall hazard.
Because this adjustment is not covered under your warranty, it is important that you
review these instructions thoroughly before proceeding.
Final Setup Drive Belt Tension Adjustment
The drive belt tension has been set at the factory. However, the belt may have stretched and
become loose. This condition may cause an audible flapping noise to be heard under the
treadmill hood. (See Preventative Maintenance 6-5 for adjustment procedure.)
CAUTION Because this adjustment is not covered under your warranty, it is important that you
review these instructions thoroughly before proceeding.