Technical Support is available from 8am to 5pm (PST) M - F at [email protected].
76
1. Safety First
ensure workspace is free of fire, electrical and other safety hazards.
Be aware of all safety issues when cutting materials with a laser. Always have a fire extinguisher on hand.
2. Power
on the laser and all of its components.
3. Ensure
that:
- The laser is powered and the boot up cycle begins on the screen.
- The water system is connected properly and water is flowing through the tube.
- The air compressor is powered and exhausting air to the laser head.
- The exhaust system is on and vented into a safe location.
4. Connect
to RetinaEngrave 2.0
Click the Settings button (Gear Icon), then click “Network”. Copy
the IP address listed and type it into your computer’s browser. You now have access to the program. There
is nothing to download. Your projects are saved automatically.
5. Home
the laser using the touch panel. Press the long blue button with the House Icon (middle of
screen). The laser will automatically home.
6. Import
your design and adjust power and speed settings. Double check settings including the number
of passes and cut order.
7. Insert
material into the laser bed. Use the focus tool to adjust to the top of the material. Focusing should
be done each time a new material is introduced.
8. Use
the “Perimeter” function to ensure that the file will fit within the cutting area. Adjust accordingly
.
9. Run
the job file. Do not leave a job running unattended.
Appendix G: Workflow Checklist
