2.1 - WHEEL TECHNICAL SPECIFICATIONS
WARNING!
Only use genuine Fulcrum spokes for your specific type and model of wheel. Failure to use correct spokes can result in an accident, personal injury or death.
2.2 - SPOKES TECHNICAL SPECIFICATIONS
WARNING!
To correctly assess wheel tension a tensiometer must be used: do not go by the tension you feel manually. It is therefore essential to have all the spoke replacement operations carried
out by a Fulcrum Store, a Fulcrum Service Centre or a mechanic specialised in assembly and maintenance on Fulcrum wheels. The spoke part numbers can be found in the spare parts
catalogue which is downloadable from our website www.fulcrumwheels.com.
ENG
RIM:
700C (622x19C)
O.L.D.:
front: 100 mm Quick Release / Thru Axle 12 mm / Thru Axle 15 mm
rear: Quick Release / 10 mm Thru Axle 135/142 mm / 12 mm Thru
Axle 135/142 mm / XD Compatible
INFLATION PRESSURE:
see the inflation pressure recommended by the producer of the tire
USAGE:
only with racing bicycles fitted with disc brakes and without any form of electrical drive system, used on tarmac roads or for trekking and cyclocross
IMPORTANT:
when using in particularly severe environmental conditions (dust, rain, mud), you are strongly advised to contact a specialised mechanic in order to have the standard gaskets replaced
with the DRP ones (Dirt Road Protection) supplied with the wheels themselves.
®
2 - TECHNICAL SPECIFICATIONS
3
