Fukuda Denshi LX-5630, Operation Manual

Page: 5 / 41

iii
Safety Considerations in Using Medical Electrical Equipment
Contents described here are general safety considerations to be
taken for proper operation of medical electrical equipment and for
the safety of both the patient and operator. Safety considerations
specific to the use of the LX-5630 are described on the next page.
WARNING
Strangulation Hazard!
l
Make sure all patient cables, leadwires, and tubing are positioned
away from the patient’s head to minimize the risk of accidental
strangulation.
l
Under no circumstances should any pouch be tied solely around a
patient’s neck.
CAUTION
1. Do not use the equipment unless you are familiar with its operation.
2. Observe the following when installing or storing the equipment:
· Select a place where the equipment may not be contaminated with splashing water.
· Consider the atmospheric pressure, temp erature and humidity and provide
adequate ventilation. Avoid direct sunlight. The equipment should not be
installed or stored in a location where it may be adversely affected by air containing
dust, saline or sulfur.
· Avoid inclination, vibration and shock, even during transport to ensure stable
operating conditions.
· Do not install or store the equipment where chemicals are stored or gases are
generated.
3. Precautions before Operation
· The equipment is not designed to be explosion-proof. Do not use the equipment in
the presence of flammable gasses or anesthetics.
· Make sure the equipment is operating safely and normally at all times.
Ensure that all cords and cables are correctly connected.
· Improper use of multiple instruments simultaneously may result in erroneous
information or lead to a hazardous accident.
4. Precautions during Operation
· Do not operate the equipment beyond the time period required for diagnosis,
monitoring or treatment.
· Observe the equipment and patient constantly for any abnormality.
· If the equipment or patient indicates any abnormality, stop the equipment from
operating or take proper measures (e.g. disconnect transducers and electrodes) to
ensure patient safety.
· Instruct the patient not to contact the equipment.