Fukuda Denshi HS-8000 Series, Service Manual

Page: 22 / 132

General Description
The HS-8000 series Super Unit is a multiparameter measurement unit. It is connected to the
DS-8500 System Patient Monitor.
This unit allows measuring multiple parameters such as ECG, Resp., NIBP, SpO
2
, BP,
Temperature, and CO. It acquires patient’s vital signs and performs signal filtering and
measurement processing. The processing results, such as waveforms and measurement data, are
displayed on the Patient Monitor screen and each operation is performed on the Patient Monitor.
For measuring the arterial oxygen saturation (SpO
2
), there are 2 types of Super Units depending
on the built-in SpO
2
module, COVIDIEN
®
/Nellcor
TM
or MASIMO
®
.
In addition, the multiparameter connectors allow measuring the parameters of TEMP, BP, and CO.
<HS-8000 series>
There are different types of model available depending on the number of ECG electrodes; 5 or 10.
And also the arterial oxygen saturation (SpO
2
), models with built-in SpO
2
modules manufactured
by Nellcor
TM
or MASIMO
®
are available.
Also, the HS-8000 series has Multiconnector and can selects and measures the parameters such
as TEMP, BP and CO.
【
Lineup of Super Unit
】
Model Type
Fixed SpO
2
module
Multiparameter
Measuring Items
CO
2
Measurement
*1
HS-8312N
ECG
(10 electrodes) x
max. 12-leads
RESP x 1
NIBP x 1
SpO
2
x 1
Nellcor
TM
Yes
HS-8312M
*3
ECG
(10 electrodes) x
max. 12-leads
RESP x 1
NIBP x 1
SpO
2
x 1
SpCO
*2
x 1
SpMet
*2
x 1
MASIMO
®
3 ports
TEMP x 6 (max.)
IBP x 6 (max.)
CO x 1 (max.)
Yes
*1: For CO
2
measurement, the external option unit, CO
2
Gas Unit HCP-800 or Gas Unit I/F
HPD-800, is necessary.
*2: Available only with HS-8312M. SpCO and SpMet are available as option.
*3 The HS-8312M allows the display of measurement condition such as PI (Perfusion Index), PVI
(Pleth Variability Index), Signal IQ. Note that PVI is available as an option..
1 － 2