Fukuda Denshi HS-8000 Series, Service Manual

Page: 16 / 132

xii
Precautions about Masimo
®
SpO
2
measurement unit (HS-8312M)
C A U T I O N
Do not connect the products which are not authorized by Masimo
®
. If you
connect such products, Fukuda Denshi shall not be liable for any trouble.
Precautions for Use of NIBP Cuff
C A U T I O N
The NIBP cuff used in this product contains natural rubber latex (excluding
latex-free cuff).
Natural rubber latex may cause allergic reactions, such as itch, redness, hives,
swelling, fever, respiratory difficulty, asthma symptom, blood pressure
reductions, or shock symptom. If such a symptom occurs, immediately cease
the operation and take appropriate measures.
Disposing of Equipment, Accessories, or Components
C A U T I O N
When disposing of this product, accessories, or components, use an industrial
waste distributor. Do not dispose of as ordinary waste.
Precautions about Transportation
For transporting the HS-8000 system, pack with specified packing materials.
Reference
Refer to
“
2. Specification
”
for Environmental Conditions during transportation.
Precautions about RTC or Data Backup
C A U T I O N
z This unit is equipped with a built-in clock, and its time links with the time of
the main unit. Even if the power of this equipment is turned OFF, a lithium
battery updates backup of the time. Every time the main unit is turned ON,
the time of the main unit is set up.
z Even if the power is turned OFF, a lithium battery backs up the list or trend
data. If these data are not backed up after the power is turned ON, a low
battery may be the cause. In such a case, contact Fukuda Denshi service
representative for replacing the battery.
z To protect the BP zero balance data during voltage dip, short interruptions
and voltage variations on power supply input lines or during short duration
of power turned OFF, this monitor performs 5-minute (approx.) backup
using the lithium battery.
To Prepare for Emergency Use
1. Accessories / Optional Accessories
(1) The ECG electrodes are consumable products. Always prepare extra supplies of
electrodes.
(2) Verify that there is no broken wire on the patient cable. Check the operation once a
week.