Fukuda Denshi HS-8000 Series, Service Manual

Page: 101 / 132

9
－
5
Test Menu Details
This section describes the HS-8000.
●
Analog Parameter
Displays all the current numeric data that can be measured.
●
MAINTENANCE
（
HS-8000
）
HS CPU A/D DATA Hex Conv Unit Status Memory Status DIP-SW Version Softwaer Serial
Power +3.3V 0200h 3.30 V OK SRAM 1Mbyte 1.Initialize : OFF Boot V01-02 #0008
+5V 0308h 5.00 V OK SDRAM 8Mbyte 2.Boot protect : OFF Installer V01-02 #0004
+12V 01C3h 12.0 V OK FLASH 4Mbyte 3.Memory Test : OFF CPU V01-02 #0025
Backup Battery 01C8h 2.93 V OK 4. : OFF Multi V01-02 #0014
CPU Board Temp 01ACh 38.8 degC OK Card Status 5.HUM Filter : OFF NIBP-Main V01-01 #0001
Board Version 0183h 2 -
Insert : OFF 6.NIBP Test : OFF Sub V01-01 #0001
ECG Board Temp 01C7h 41.5 degC OK Protect : OFF 7.CO2 I/F Debug: OFF FPGA V01-01 #0001
Board Version 0132h 1 -
8.Install : OFF
FPGA /ECG 5V FAIL ----h ---- - OK POD Detect : OFF
AOUT_VCC_FAIL ----h ---- - OK
Mother Board Vertion 0146h 1 - Communication Status TX RX Error Interrupt
NIBP Board Temp ----h 41.5 degC OK M-LAN OK 002529AB 000C3C91 00000001 000C3C92
Board Version ----h 1 -
ECG OFF 00000000 00000000 00000000 00D1D0AE
Multi Multi OK 00000174 0573BDE2 00000000 00000000
Power +3.3V 0202h 3.31 V OK NIBP OK 00000000 00000000 00000000 00000000
+5V(SpO2) 02FAh 4.92 V OK POD OFF 00000000 00000000 00000000 00000000
+5V(AMP) 0305h 5.00 V OK SpO2 OK 00000000 00000000 00000000 00000000
Board Temp 01BCh 40.0 degC OK
Version 0136h 1 -
----------------------------------------------------------------------------------------------------------------------------
Task Performance
min max real stack size
Main(us) : 20 374776 8024 907
1ms(us) : 8 288 108 1953
4ms(us) : 352 924 648 2002
24ms(us) : 20 2808 52 1880
100ms(us) : 164 6808 288 1641
Module-LAN(us) : 1328 3556 3292 1972
Arrhythmia(us) : 34152 39640 38516 2046
----------------------------------------------------------------------------------------------------------------------------
Module-LAN Error Counter
RxFifoLevel 00000000 | RxErrorStatus 00000001
RxFrame 00000000 | CrcError 00000001
RxError 00000000 | CollisionSeenError 00000000
RxFrameCount 00000000 | FrameTooLongError 00000000
| RuntFrameError 00000000
TxError 00000000 | LengthError 00000000
TxExcessive 00000000 | MiiError 00000000
TxCarrier 00000000 |
TxLateCollison 00000000 |
CPU A/D DATA
Checks the voltage or board temperature read from the AD converter and checks if they are within
normal limit (normal operation).
If “NG” is displayed, malfunction of the circuit can be considered.
Board information
Displays the mounted board version, software version and serial number, and other information.
Memory Status
Displays amount of installed memory information
*Depending on the version of the board, the amount of installed memory differs.
Version Software Serial