Fujitsu SPARC M10-1, Service Manual

Page: 80 / 230

Note - Make a note of the mounting positions of the PCIe risers before removing them to
ensure that they are reinstalled correctly.
Caution -
Remove all the memory before removing the motherboard unit. Otherwise,
the memory may be damaged.
Note - Make a note of the mounting positions of the memory modules before removing them
to ensure that they are reinstalled correctly.
Note - Record the positions of the cables before removing them to ensure that they are
reinstalled correctly.
7.
Remove all the PCI Express (PCIe) risers.
For details, see " 12.4.2 Removing a PCI Express riser ."
Removing the PCIe risers enables you to easily remove the cables from the PSU
backplane.
7.4.2 Removing the motherboard unit
1.
Remove all the memory.
For details, see " 8.5.2 Removing memory ."
2.
Release the cable lock guide.
For details, see " 5.3.6 Releasing the cable guide lock ."
If the cable guide does not have a lock, proceed to step 3.
3.
Remove the cables connected to the motherboard unit.
The following cables should be removed:
a. Three (3) cables on the motherboard unit that connect the PSU backplane to
the motherboard unit
b. One (1) cable that connects the PSU backplane to the HDD backplane
The cable does not have to be removed from the HDD backplane.
c. Two (2) cables that connect the HDD backplane to the motherboard unit
d. Two (2) cables that connect the operation panel to the motherboard unit
Fujitsu M10-1/SPARC M10-1 Service Manual
･
November 2014 64