Fujitsu SPARC M10-1, Service Manual

Page: 106 / 230

Table 8-3 Types of memory maintenance
Active/hot Inactive/hot
(system
stopped/hot)
Inactive/cold
(system
stopped/cold)
- - OK
Table 8-4
Flow of maintenance
Task
Replacement
Expansion Reduction
1 Preparation 8.4 8.4 8.4
2 Memo ry removal 8.5 8.5.1 8.5
3 Memo ry installation 8.6 8.6 8.6.2
4 System restoration 8.7 8.7 8.7
8.3.1 Types of maintenance
Table 8-3 lists the types of maintenance for the memory. For the definition of
maintenance, see " 4.3 Understanding Types of Maintenance ."
8.3.2 Flow of maintenance
Table 8-4 shows the procedure for memory maintenance. See the corresponding
section and item.
The memory expansion procedure is same as the memory installation procedure. The
memory reduction procedure is the same as the memory removal procedure.
8.3.3 Precautions for replacement
Observe the following when replacing memory:
■
When you replace a memory module, make sure that you install the new module
in the same position as the original one.
8.3.4 Precautions for expansion
Observe the following when expanding memory:
■
Observe the memory installation rules when you expand memory. For details, see
" 8.2.1 Memory installation rules ."
■
When you expand the memory modules from 8 to 12 modules or from 12 to 16
modules, the physical address configurations of the memory modules are
Fujitsu M10-1/SPARC M10-1 Service Manual
･
November 2014 90