Fujitsu SPARC M10-1, Service Manual

Page: 63 / 230

Please execute the following steps:
1) Confirm the Check LED is blinking.
2) Remove FAN#6.
3) Execute either the following:
3-1) After installing the exchanged device, please select 'finish'.
3-2) If you want to suspend the maintenance without exchanging device,
please select 'cancel'.
[f:finish|c:cancel] :
f
Chapter 6
Understanding the Preparations for
Restoring the System
This chapter describes how to perform the work required to restore the system after
component maintenance. See this chapter, as required, when performing the
maintenance work on each component described in Chapter 7 onwards.
■
Incorporating an FRU into the System with the replacefru Command
■
Starting the System
■
Restoring the Chassis
6.1 Incorporating an FRU into the System
with the replacefru Command
This section describes the procedure for incorporating a Field Replaceable Unit (FRU)
into the system after maintenance. To do this, resume the replacefru command,
which is running, to incorporate the FRU into the system. The following FRUs can be
maintained.
■
Power supply unit
■
Fan unit
1.
After performing maintenance on the FRU, return to the operation of the XSCF
firmware replacefru command, and then enter "f".
The following screen is displayed. Wait until the processing has completed.
47