Fujitsu SPARC ENTERPRISE T1000, Installation Manual, Page: 66 / 84

40 SPARC Enterprise T1000 Server Installation Guide • April 2007
▼
(Optional) To Reset the System
●
If it is necessary to reset the system, use the
init 6
command.
Note – Do not power the system off and on.
▼
To Power Cycle the System
If a simple reset does not clear a system problem, you can power the system off and
on with this procedure.
1. Halt the Solaris OS.
At the Solaris OS prompt, issue the
init 0
command to halt the Solaris OS and to
return to the
ok
prompt.
2. Switch from the system console prompt to the SC console prompt by typing the
#.
escape sequence.
3. Using the SC console, type the
poweroff
command.
# init 6
# init 0
WARNING: proc_exit: init exited
syncing file systems... done
Program terminated
ok
ok #.
sc>
sc> poweroff -fy
SC Alert: SC Request to Power Off Host Immediately.