Fujitsu SPARC ENTERPRISE T1000, Installation Manual, Page: 60 / 84

34 SPARC Enterprise T1000 Server Installation Guide • April 2007
Note – After setting the configuration parameters, you must reset the system
controller for the new values to take affect. See “To Reset the System Controller” on
page 34 .
▼ To Reset the System Controller
●
Issue the
resetsc
command.
You are prompted to confirm that you want to reset the system controller. Type
y
when prompted.
Note – To bypass the confirmation message, specify the
–y
flag to the
resetsc
command.
The system controller resets, runs diagnostics, and returns to the login prompt.
diag_verbosity normal
diag_level max
diag_mode normal
sys_autorunonerror false
ser_baudrate 9600
ser_parity none
ser_stopbits 1
ser_data 8
netsc_enetaddr
xx
:
xx
:
xx
:
xx
:
xx
:
xx
sys_enetaddr
yy
:
yy
:
yy
:
yy
:
yy
:
yy
sc> resetsc
Are you sure you want to reset the SC [y/n]? y
User Requested SC Shutdown
ALOM POST 1.x
Dual Port Memory Test, PASSED.
TTY External - Internal Loopback Test
TTY External - Internal Loopback Test, PASSED.
TTYC - Internal Loopback Test