Fujitsu SPARC ENTERPRISE T1000, Installation Manual, Page: 55 / 84

Chapter 3 Powering On the System 29
Note –
If it receives no user input within 60 seconds, the ALOM CMT system
controller console automatically connects to the system console.
Logging In To the ALOM CMT System
Controller
You can log in to the system controller through either the serial management port or
the network management port.
▼
To Log In To the System Controller Using the
Serial Management Port
After the system controller boots, you can access the ALOM CMT command-line
interface to configure and manage the system.
The
sc
prompt is displayed the first time the system controller is booted. The default
configuration provides an ALOM CMT user account called
admin
. There is no
default password, so you must create a password using the system controller
password command.
MPC885 - - PASSED
sc>
CODE EXAMPLE 3-1
Boot Sequence Example (Continued)