SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual
59
Interval:
Enter the interval value used here. This value must be between 5 and 600 seconds. By default, this value is
5 seconds.
Retries:
Enter the retries value used here. This value must be between 0 and 360. By default, this value is 3. Tick the
Infinite option to disable this feature.
From Port / To Port:
Select the appropriate port range used for the configuration here.
Type:
Select the type of storm attack that will be controlled here. Options to choose from are
Broadcast
,
Multicast
,
and
Unicast
. When the action is configured as the shutdown mode, the unicast refers to both known and unknown
unicast packets; that is, if the known and unknown unicast packets hit the specified threshold, the port will be
shutdown.
Action:
Select the action that will be taken here. Options to choose from are
None
,
Shutdown
, and
Drop
.
None -
Do not to filter the storm packets.
Shutdown -
Shut down the port when the value specified for rise threshold is reached.
Drop -
Discard packets that exceed the risen threshold.
Level Type:
Select the level type option here. Options to choose from are
PPS
and
Kbps
.
PPS Rise:
This is available when
PPS
is selected in
Level Type
. Enter the rise packets per second value here. This
option specifies the rise threshold value in packets count per second. This value must be between 0 and 14881000
packets per second. If the low PPS value is not specified, the default value is 80% of the specified risen PPS.
PPS Low:
This is available when
PPS
is selected in
Level Type
. Enter the low packets per second value here. This
option specifies the low threshold value in packets count per second. This value must be between 0 and 14881000
packets per second. If the low PPS value is not specified, the default value is 80% of the specified risen PPS.
Click
Apply
to accept the changes made for each individual section.
After selecting the
Kbps
option as the
Level Type
, the following parameters are available.
Figure 12-6 Storm Control (Kbps)
The fields that can be configured are described below:
KBPS Rise:
Enter the rise KBPS value used here. This option specifies the rise threshold value as a rate of kilobits
per second at which traffic is received on the port. This value must be between 0 and 2147483647 Kbps.
KBPS Low:
Enter the low KBPS value used here. This option specifies the low threshold value as a rate of kilobits per
second at which traffic is received on the port. This value must be between 0 and 2147483647 Kbps. If the low KBPS
is not specified, the default value is 80% of the specified risen KBPS.
Click
Apply
to accept the changes made.
