SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual
23
Recurring Setting -
Select to configure the summer time that should start and end on the specified week day
of the specified month.
Date Setting -
Select to configure the summer time that should start and end on the specified date of the
specified month.
Time Zone:
Select to specify your local time zone’s offset from Coordinated Universal Time (UTC).
From: Week of the Month:
Select week of the month that summer time will start.
From: Day of the Week:
Select the day of the week that summer time will start.
From: Month:
Select the month that summer time will start.
From: Time (HH:MM):
Select the time of the day that summer time will start.
To: Week of the Month:
Select week of the month that summer time will end.
To: Day of the Week:
Select the day of the week that summer time will end.
To: Month:
Select the month that summer time will end.
To: Time (HH:MM):
Select the time of the day that summer time will end.
Offset:
Enter the number of minutes to add during summer time. The default value is 60. The range of this offset is 30,
60, 90 and 120.
From: Date of the Month:
Select date of the month that summer time will start.
From: Month:
Select the month that summer time will start.
From: Year:
Enter the year that the summer time will start.
From: Time (HH:MM):
Select the time of the day that summer time will start.
To: Date of the Month:
Select date of the month that summer time will end.
To: Month:
Select the month that summer time will end.
To: Year:
Enter the year that the summer time will end.
To: Time (HH:MM):
Select the time of the day that summer time will end.
Offset:
Enter the number of minutes to add during summer time. The default value is 60. The range of this offset is 30,
60, 90 and 120.
Click
Apply
to accept the changes made.
SNTP Settings
This window is used to configure the time settings for the Switch.
Figure 7-14 SNTP Settings
The fields that can be configured are described below:
SNTP State:
Select this option to enable or disable SNTP.
Poll Interval:
Enter the synchronizing interval in seconds. The value is from 30 to 99999 seconds. The default interval
is 720 seconds.
IPv4 Address:
Enter the IP address of the SNTP server which provides the clock synchronization.
Click
Apply
to accept the changes made.
Click
Add
to add a new entry based on the information entered.
Click
Delete
to remove the specified entry.
