SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual
53
Queue Settings
This window is used to view and configure the queue settings.
Figure 11-3 Queue Settings
The fields that can be configured are described below:
From Port / To Port:
Select the appropriate port range used for the configuration here.
Queue ID:
Select the queue ID value here. Options to choose from are
0
to
7
.
WRR Weight:
Enter the WRR weight value here. This value must be between 0 and 127. To satisfy the behavior
requirements of Expedited Forwarding (EF), the highest queue is always selected by the Per-hop Behavior (PHB) EF
and the schedule mode of this queue should be strict priority scheduling. So the weight of the last queue should be
zero while the Differentiate Service is supported.
Click
Apply
to accept the changes made.
