SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual
44
Figure 9-21 IGMP Snooping VLAN Settings
The fields that can be configured are described below:
Minimum Version:
Select the minimum version of IGMP hosts that is allowed on the VLAN.
Querier State:
Enable or disable the querier state.
Query Version:
Select the general query packet version sent by the IGMP snooping querier. Options to choose from
are
1
,
2
, and
3
.
Query Interval:
Enter the interval at which the IGMP snooping querier sends IGMP general query messages
periodically.
Max Response Time:
Enter the maximum response time, in seconds, advertised in IGMP snooping queries. The
range is 1 to 25.
Robustness Value:
Enter the robustness variable used in IGMP snooping.
Last Member Query Interval:
Enter the interval at which the IGMP snooping querier sends IGMP group-specific or
group-source-specific (channel) query messages.
Rate Limit:
Enter the IGMP snooping rate limit used. Tick
No Limit
to ignore the rate limit.
Click
Apply
to accept the changes made.
Click the
X
button at the upper-right side to close the window.
