manualshive.com logo in svg

Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.1 Operation, User Manual

The Operation Manual for Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.1 is now available for free download from our website. Obtain in-depth knowledge of this powerful product's operation, features, and functionalities to maximize efficiency and streamline cloud resource management. Enhance your experience with the comprehensive manual accessible at manualshive.com.

Share
Download
background image

 Note

-

To enable the above mentioned setting, restart the manager after editing the definition file.

-

The orders of some lists, such as for blade servers in the server tree, cannot be changed.

A.5  [Resource List] Tab

The [Resource List] tab in the Main Panel displays a list of resources related to the resource that was selected in the resource tree.
For details on the icons used to indicate different resources, refer to "11.2 Resource Status" in the "Operation Guide CE".

The table below shows the information displayed in the Resource List for each selectable resource.

Server Resources

Information on all registered chassis, servers, and LAN switches.

Chassis

Information on registered servers and LAN switch blades mounted in the selected chassis is displayed.
For PRIMEQUEST, SPARC Enterprise M4000/M5000/M8000/M9000, or SPARC M10-4S, information on the partitions configured
on the chassis is displayed.

Server

Information on the physical OSs, VM hosts, and VM guests running on the selected server.

Physical OS

Information on the selected physical OS.

VM Host

Information on the VM guests running on the selected VM host.

VM Guest

Information on the selected VM guest.

Network Devices

Information on the selected network device is displayed.

Unregistered Server

Information on the selected unregistered server.

Network Resources

Information on all registered network resources is displayed.

Power Monitoring Devices

Information on all registered power monitoring devices.

Management Software

Information on all registered management software.

Management Software (vCenter Server, SCVMM, OVM Manager, or VIOM)

Information on the selected management software.

Storage Resources

Information on all registered storage resources is displayed.

Storage Management Software

Information on storage units, virtual storage, and disk resources that are operating using the selected storage management software is
displayed.

- 289 -

Summary of Contents for ServerView Resource Orchestrator Cloud Edition V3.1.1 Operation































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ServerView Resource Orchestrator Cloud Edition V3.1.1 Operation

Blackberry MAIL - BROWSING SMARTPHONE User Manual preview
MAIL - BROWSING SMARTPHONE
Brand: Blackberry Pages: 25
Pioneer Serato Flip User Manual preview
Serato Flip
Brand: Pioneer Pages: 11
VMware CLOUD DIRECTOR 1.0 Using preview
CLOUD DIRECTOR 1.0
Brand: VMware Pages: 3
VMware VmWare ESX Server 2.12 Deployment Deployment Manual preview
VmWare ESX Server 2.12 Deployment
Brand: VMware Pages: 34
VMware VCM 5.3 Manual preview
VCM 5.3
Brand: VMware Pages: 34
McAfee NAPCKE-AB-AA - VirusScan For NetApp Configuration Manual preview
NAPCKE-AB-AA - VirusScan For NetApp
Brand: McAfee Pages: 54
Livescribe DESKTOP VERSION 1.2 User Manual preview
DESKTOP VERSION 1.2
Brand: Livescribe Pages: 70
Acroprint ATR 20/20 Quick Start Manual preview
ATR 20/20
Brand: Acroprint Pages: 1
ACRONIS TRUE IMAGE CORPORATE WORKSTATION 8.0 User Manual preview
TRUE IMAGE CORPORATE WORKSTATION 8.0
Brand: ACRONIS Pages: 79
ACRONIS TRUEIMAGE DELUXE User Manual preview
TRUEIMAGE DELUXE
Brand: ACRONIS Pages: 90
ACRONIS TRUE IMAGE 8.0 User Manual preview
TRUE IMAGE 8.0
Brand: ACRONIS Pages: 97
Amanda Amanda@Work.Group/DOS Version 7.xx User Manual preview
[email protected]/DOS Version 7.xx
Brand: Amanda Pages: 84
Amanda Amanda Portal CallQ Agent User Manual preview
Amanda Portal CallQ Agent
Brand: Amanda Pages: 61
Amanda Amanda Portal Telephone Features System Reference Manual preview
Amanda Portal Telephone Features
Brand: Amanda Pages: 226
Pfaff CREATIVE 4D Brochure preview
CREATIVE 4D
Brand: Pfaff Pages: 8
Intel Active Management Technology v5.0 Administrator'S Manual preview
Active Management Technology v5.0
Brand: Intel Pages: 143
LaCie 4L User Manual preview
4L
Brand: LaCie Pages: 6
MACROMEDIA BREEZE-FOR MEETING PRESENTERS Manual preview
BREEZE-FOR MEETING PRESENTERS
Brand: MACROMEDIA Pages: 96

Brands by name

Popular brands

Load more brands