Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.1 Operation User Manual Download Page 294

Page: 294 / 414

Table A.8 Popup Menus Available for System Images

Popup Menu

Function

Submenu

Restore

Restores a system image to a server.

Delete

Deletes a system image.

Table A.9 Popup Menus Available for Cloning Images

Popup Menu

Function

Submenu

Deploy

Deploys a cloning image to a server.

Delete

Deletes a cloning image.

Note

If ServerView Deployment Manager is used on the admin LAN, the popup menu for cloning images cannot be used.

Table A.10 Popup Menus Available for Network Devices

Popup Menu

Function

Submenu

Topology

Discover LAN switches

Discovers LAN switches within the admin LAN.

Detect physical links

Acquires physical link data from registered LAN
switches.

Table A.11 Popup Menus Available for the "Power Monitoring Devices" Tree Node

Popup Menu

Function

Submenu

Power Monitoring Device

Registers a power monitoring device.

Export

Environmental Data

Exports environmental data.

Table A.12 Popup Menus Available for Power Monitoring Devices

Popup Menu

Function

Submenu

Delete

Deletes a power monitoring device (PDU or UPS).

Update (*)

Updates a power monitoring device (PDU or UPS).

Modify

Registration Settings

Modifies a power monitoring device's registration
settings.

Hardware
Maintenance

Re-configure

Detects and reconfigures the properties of a replaced
power monitoring device (PDU or UPS).

Export

Environmental Data

Exports environmental data.

*1: Unlike other resources, the properties of a power monitoring devices are not automatically updated. Use this option to update them
manually when necessary.

- 278 -

Summary of Contents for ServerView Resource Orchestrator Cloud Edition V3.1.1 Operation































































































































































































































































































































































































































Search results

Summary of Contents for ServerView Resource Orchestrator Cloud Edition V3.1.1 Operation

Reviews:

Related manuals for ServerView Resource Orchestrator Cloud Edition V3.1.1 Operation

Brands by name

Popular brands

Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.1 Operation, User Manual

Search results

Summary of Contents for ServerView Resource Orchestrator Cloud Edition V3.1.1 Operation

Reviews:

Related manuals for ServerView Resource Orchestrator Cloud Edition V3.1.1 Operation

Brands by name

Popular brands