manualshive.com logo in svg

Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.1 Operation, User Manual

The Operation Manual for Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.1 is now available for free download from our website. Obtain in-depth knowledge of this powerful product's operation, features, and functionalities to maximize efficiency and streamline cloud resource management. Enhance your experience with the comprehensive manual accessible at manualshive.com.

Share
Download
background image

Port Groups Area (IBP)

NIC Index

The mounted position (index) of each network interface on the server is displayed.

Group

The names of the port groups set on the LAN switch ports connected to each network interface (for LAN switch blades operating
in IBP mode) are displayed.

Only "-" is displayed under the following conditions.

-

The corresponding LAN switch is not registered

-

The corresponding LAN switch is not operating in IBP mode

-

The corresponding LAN switch port has not been assigned to a port group

Monitoring Information

Timeout(sec)

The time-out value (in seconds) for ping monitoring is displayed.

Recovery method

The recovery performed when an error is detected is displayed.

Number of reboots

The number of times reboot is performed during recovery is displayed.

WWN Settings Area

The following information is not displayed for VM guests or servers other than SPARC Servers/SPARC Enterprise.

WWPN of port n (n:1-8)

The WWPN value of the port 

n

 is displayed.

Values set by users are reflected on WWPN.

Target CA WWPN

The WWPN for the CA connected to the port 

n

 is displayed.

Target CA AffinityGroup

The AffinityGroup for the CA connected to the port 

n

 is displayed.

Automatic Network Configuration

The following information is displayed when the VM host is a target of network auto configuration and only when automatic network
configuration has been performed.

Network resource name

The network resource name for which automatic network configuration is performed is displayed.

VLAN ID

The VLAN ID configured for the network resource is displayed.

Subnet Address

The subnet address configured for the network resource is displayed.
When it is not configured, "-" is displayed.

- 300 -

Summary of Contents for ServerView Resource Orchestrator Cloud Edition V3.1.1 Operation































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ServerView Resource Orchestrator Cloud Edition V3.1.1 Operation

FARONICS POWER SAVE MAC Getting Started Manual preview
POWER SAVE MAC
Brand: FARONICS Pages: 5
FARONICS POWER SAVE Product Data Sheet preview
POWER SAVE
Brand: FARONICS Pages: 2
FARONICS DEEP FREEZE ENTERPRISE Getting Started Manual preview
DEEP FREEZE ENTERPRISE
Brand: FARONICS Pages: 3
FARONICS ANTI-EXECUTABLE ENTERPRISE Getting Started Manual preview
ANTI-EXECUTABLE ENTERPRISE
Brand: FARONICS Pages: 2
Juniper NETWORK AND SECURITY MANAGER 2010.4 - REV1 Installation Manual preview
NETWORK AND SECURITY MANAGER 2010.4 - REV1
Brand: Juniper Pages: 244
KAPERSKY ANTI-VIRUS 5.5 - FOR NOVELL NETWARE Administrator'S Manual preview
ANTI-VIRUS 5.5 - FOR NOVELL NETWARE
Brand: KAPERSKY Pages: 134
Sanyo VA-SW8000 Instruction Manual preview
VA-SW8000
Brand: Sanyo Pages: 132
Siemens OC130S Installation Instructions Manual preview
OC130S
Brand: Siemens Pages: 11
Siemens ID Mouse V 3.1 User Manual preview
ID Mouse V 3.1
Brand: Siemens Pages: 28
Siemens ROS User Manual preview
ROS
Brand: Siemens Pages: 32
Siemens OpenScape Xpressions PhoneMail User Manual preview
OpenScape Xpressions PhoneMail
Brand: Siemens Pages: 110
John Bowen Solaris V5 User Manual preview
Solaris V5
Brand: John Bowen Pages: 47
Ulead DVD MOVIEFACTORY-DVD PLUG-IN Manual preview
DVD MOVIEFACTORY-DVD PLUG-IN
Brand: Ulead Pages: 8
Ulead DVD DISCRECORDER 2.3 User Manual preview
DVD DISCRECORDER 2.3
Brand: Ulead Pages: 15
Ulead DVD DISCRECORDER 2.2 User Manual preview
DVD DISCRECORDER 2.2
Brand: Ulead Pages: 16
Nikon Capture 3 Install Manual preview
Capture 3
Brand: Nikon Pages: 119
GRASS VALLEY KAYAK HD Installation And Service Manual preview
KAYAK HD
Brand: GRASS VALLEY Pages: 216
Bay Networks NA User Manual preview
NA
Brand: Bay Networks Pages: 88

Brands by name

Popular brands

Load more brands