Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.1 Operation User Manual Download Page 347

Page: 347 / 414

Capacity

Disk Capacity

Total Capacity

The total disk capacity of the storage pool is displayed.

Unused Capacity

The free disk capacity of the storage pool is displayed.

Virtual Storage List

Name (Label)

The name of the registered virtual storage is displayed.

Status

The status of the registered virtual storage is displayed.

Capacity (Unused Capacity/Total Capacity)

The capacity of the registered virtual storage is displayed.

Storage Type

The type of the registered virtual storage is displayed.

Attributes

The type of the virtual storage is displayed.

Disk Resource List

Name (Label)

The disk name is displayed. A link to the detailed information of the allocated disk is displayed.

Status

The disk status is displayed.

Size

The disk size is displayed.

Virtual Storage

The disk allocation destination is displayed.

The shared settings of the disk are displayed.

Attributes

The attributes that have been set are displayed.

When thin provisioning is configured

"Thin Provisioning" is displayed.

When thick provisioning is configured

"Thick Provisioning" is displayed.

Allocated L-Server

The name of the L-Server to which a disk has been allocated is displayed.

- 331 -

Summary of Contents for ServerView Resource Orchestrator Cloud Edition V3.1.1 Operation































































































































































































































































































































































































































Search results

Summary of Contents for ServerView Resource Orchestrator Cloud Edition V3.1.1 Operation

Reviews:

Related manuals for ServerView Resource Orchestrator Cloud Edition V3.1.1 Operation

Brands by name

Popular brands

Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.1 Operation, User Manual

Search results

Summary of Contents for ServerView Resource Orchestrator Cloud Edition V3.1.1 Operation

Reviews:

Related manuals for ServerView Resource Orchestrator Cloud Edition V3.1.1 Operation

Brands by name

Popular brands