Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.1 Operation User Manual Download Page 295

Page: 295 / 414

Table A.13 Popup Menus Available for Management Software

Popup Menu

Function

Submenu

Management Software (vCenter
Server)

Registers VM management software (VMware vCenter
Server).

Management Software (SCVMM)

Registers VM management software (System Center
Virtual Machine Manager).

Management Software (OVM
Manager)

Registers management software (OVM Manager).

Management Software (VIOM)

Registers VM management software (VIOM).

Table A.14 Popup Menus Available for Management Software (vCenter Server/SCVMM/VIOM)

Popup Menu

Function

Submenu

Delete

Deletes management software.

Update

Updates management software information.

Modify

Registration Settings

Modifies registration settings for management software.

Table A.15 Popup Menus Available for Network Devices

Popup Menu

Function

Submenu

Unregister

Deregisters the selected network devices from a resource
pool.

Update

Obtains and updates the information on the selected
network devices.

Move Resources

Moves the selected network devices to another resource
pool.

Maintenance Mode

Set

Places a server into maintenance mode.

Release

Releases maintenance mode.

External Management
Software

Starts the management screen (Web console) provided
by the network device.

Table A.16 Popup Menus Available for the Orchestration Tree

Popup Menu

Function

Submenu

Create

Folder

Creates a resource folder.

Tenant

Create tenants.

Pool

Creates a resource pool.

L-Server

Create an L-Server.

Power

Powers on all L-Servers in a resource folder.

OFF

Powers off all L-Servers in a resource folder.

Reboot

Reboots all L-Servers in a resource folder.

- 279 -

Summary of Contents for ServerView Resource Orchestrator Cloud Edition V3.1.1 Operation































































































































































































































































































































































































































Search results

Summary of Contents for ServerView Resource Orchestrator Cloud Edition V3.1.1 Operation

Reviews:

Related manuals for ServerView Resource Orchestrator Cloud Edition V3.1.1 Operation

Brands by name

Popular brands

Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.1 Operation, User Manual

Search results

Summary of Contents for ServerView Resource Orchestrator Cloud Edition V3.1.1 Operation

Reviews:

Related manuals for ServerView Resource Orchestrator Cloud Edition V3.1.1 Operation

Brands by name

Popular brands