SNMP Community
Enter the SNMP community of the XSCF used to manage the target chassis.
Either select [public] or enter an arbitrary string.
Enter a string of up to 32 alphanumeric characters, underscores ("_"), and hyphens ("-").
Remote management controller (XSCF)
User ID
Enter the ID of an XSCF user account with administrative authority over the target chassis.
Enter a string of up to 31 alphanumeric characters, hyphens ("-"), and underscores ("_"). This name must start with an alphabet
character.
This user should have "platadm" privileges for XSCF.
The user ID reserved for the system cannot be used. Create another user ID.
For details, refer to the XSCF manuals.
Password
Enter the password of an XSCF user account with administrative authority over the target chassis.
Enter up to 32 characters, including alphanumeric characters, blank spaces (" "), and any of the following symbols.
"!", "@", "#", "$", "%", "^", "&", "*", "[", "]", "{", "}", "(", ")", "-", "+", "=", "~", ",", ">", "<", "/", "'", "?", ";", ":"
3.
Click <OK>.
The mounted chassis will be displayed under the server resource tree.
Any partition mounted within this chassis will be detected automatically and shown as: [
chassis_name
-
partition_number
[Unregistered]].
The only operation available for those unregistered partitions is server registration, while the ROR console can only display their
hardware statuses and properties.
5.9.2 Registering SPARC Enterprise (M3000/T Series) and SPARC M10-1/
M10-4
This section explains the methods for registering SPARC Enterprise (M3000/T series) and SPARC M10-1/M10-4.
This section also describes how to register servers in SPARC Enterprise M4000/M5000/M8000/M9000 and SPARC M10-4S chassis.
[Solaris Zones] [OVM for SPARC]
When the Logical Domains Manager daemon is enabled, VM hosts can be registered as Solaris Zones by configuring the definition files.
For details, refer to "Chapter 8 Creating Definition Files" in the "Setup Guide CE".
Use the following procedure to register servers:
1.
The dialog is displayed.
-
For SPARC Enterprise (M3000/T series)
In the ROR console server resource tree, right-click [Server Resources], and select as below.
Select [Register]-[SPARC Enterprise (M3000/T Series)] from the popup menu.
The [Register SPARC Enterprise] dialog is displayed.
-
For SPARC M10-1/M10-4
In the ROR console server resource tree, right-click [Server Resources], and select as below.
Select [Register]-[SPARC M10-1/M10-4] from the popup menu.
The [Register SPARCM10-1/M10-4] dialog is displayed.
-
For SPARC Enterprise M4000/M5000/M8000/M9000 or SPARC M10-4S
Right-click the server in the chassis, and select as follows:
Select [Register]-[Server] from the popup menu.
The [Register Server] dialog is displayed.
- 48 -
