Fujitsu SCENIC S, Operating Manual

Page: 37 / 69

Troubleshooting and tips
A26361-K523-Z100-6-7619
29
Wrong monitor has been set under Windows 2000
Ê
Restart the PC.
Ê
If the message Starting Windows appears, press function key
[F8]
.
The
Windows 2000 Advanced Options Menu
appears.
Ê
Select Safe Mode or Safe Mode with Network .
Ê
Set the correct values for the attached monitor by selecting Start - Settings - Control Panel -
Display - Settings
.
The wrong RAM memory modules have been inserted
See the Technical Manual for the system board for information on which memory modules can be
used.
Flickering stripes across the monitor
!
Switch off the PC immediately.
Monitor does not support the set horizontal frequency
Ê Find out which horizontal frequency your monitor screen supports. You will find the horizontal
frequency (also known as line frequency or horizontal deflection frequency) in the
documentation of your monitor.
Ê
Refer to the documentation of your operating system or the corresponding driver software for
the graphics card for instructions on how to set the correct horizontal frequency for your
monitor, and follow the procedure accordingly.
No screen display or display drifts
The wrong horizontal frequency and/or resolution has been selected for the monitor or for
the application programme.
Ê
Find out which horizontal frequency your monitor screen supports. You will find the horizontal
frequency (also known as line frequency or horizontal deflection frequency) in the
documentation of your monitor.
Ê
Refer to the documentation of your operating system or the corresponding driver software for
the graphics card for instructions on how to set the correct horizontal frequency for your
monitor, and follow the procedure accordingly.