Troubleshooting and tips
28
A26361-K523-Z100-6-7619
The screen stays blank
If your screen remains blank this may be due to the following:
Monitor is switched off
Ê
Switch your monitor on.
Power cable or monitor cable not connected
Ê
Switch off the monitor and the PC.
Ê
Check whether the power cable is properly connected to the monitor and to the power outlet or
PC.
Ê
Check whether the monitor cable is properly connected to the PC and monitor (if it is plugged
in with a connector).
Ê
Switch on the monitor and the PC.
Power saving has been activated (screen is blank)
Ê
Press any key on the keyboard.
or
Ê
Deactivate the screen saver. Enter the appropriate password.
Brightness control is set too dark
Ê
Adjust the brightness control. For detailed information, please refer to the Operating Manual
supplied with your monitor.
Wrong monitor has been set under Windows NT
Ê
Restart the PC in standard VGA mode.
Ê
Set the desired resolution in the
Control Panel
window using the
Display
programme, and adjust
the monitor display as described in the Operating Manual of the monitor.
Wrong monitor has been set under Windows 9x
Ê
Restart the PC.
Ê
If the message
Starting Windows 9x
appears, press function key
[F8]
.
The Windows 9x
Start
menu appears.
Ê
Select the option
Safe mode
or
Safe mode with network support
.
Ê
Set the correct values for the attached monitor by selecting
Start - Settings - Control Panel -
Display - Settings
.
Summary of Contents for SCENIC S
Page 1: ...SCOVERY com Operating Manual SCENIC S SCOVERY xS E n g l i s h ...
Page 3: ......
Page 10: ......
Page 34: ......
