Fujitsu PRIMERGY RX300 S6, Operating Manual

Page: 75 / 130

RX300 S6
Operating manual 75
Controls and indicators
LAN indicators
Figure 23: Indicators on the connection panel: LAN indicators
I
Depending on the settings in the BIOS, the standard LAN connector 1
may also be used as a service LAN connector. You will find further
information in the "D2619-N15 BIOS Setup Utility for PRIMERGY
RX300 S6 and TX300 S6" manual.
1 LAN
link/transfer
(service LAN)
Steady green signal
when a LAN connection exists.
Remains dark
when no LAN connection exists.
Flashes green
when LAN transfer takes place.
2 LAN speed
(service LAN)
Steady green signal
in the event of a LAN transfer rate
of 100 Mbit/s.
Remains dark
in the event of a LAN transfer rate of
10 Mbit/s.
3 LAN
link/transfer
(system LAN)
Steady green signal
when a LAN connection exists.
Remains dark
when no LAN connection exists.
Flashes green
when LAN transfer takes place.
4 LAN speed
(system LAN)
Steady yellow signal
in the event of a LAN transfer rate
of 1 Gbit/s
Steady green signal
in the event of a LAN transfer rate
of 100 Mbit/s.
Remains dark
in the event of a LAN transfer rate of
10 Mbit/s.
1 2 3 4 3 4