Fujitsu PRIMERGY RX300 S6, Operating Manual, Page: 117 / 130

RX300 S6
Operating manual 117
Non-hot-plug components
8.2.2 Replacing an expansion card
Ê
The illuminated orange indicator shows which is the slot for the defective
expansion card.
Figure 39: Removing the expansion card
Ê
If necessary, disconnect the cables from the defective expansion card.
Ê
Loosen the screw on the rear cover (see circle).
Ê
Remove the defective expansion card from the server (see arrows).
I
For the installing order see the configurator provided for the RX300 S6:
http://ts.fujitsu.com/products/standard_servers/index.htm
L
(for the EMEA market)
http://primeserver.fujitsu.com/primergy/system.html
for the Japanese market