Fujitsu PRIMERGY GX2570 M6, Upgrade And Maintenance Manual, Page: 70 / 283

▶
Choose one of the following options from the update tool menu to start the
BMC update process:
Normal :
Choose this option to update an existing system board.
Initial :
Choose this option if the system board has been replaced prior to the BMC
update procedure. This option will perform all relevant flash procedures in a
row, including the BMC firmware and bootloader.
CAUTION
If the process is interrupted, the BMC may be permanently corrupted.
▶
Do not interrupt the BMC upgrade process after it has started.
If the BMC does not work after flashing, disconnect the system from
the mains and reconnect it again.
▶
After completion of the flash process, remove the USB stick and restart the
server.
BMC recovery procedure
▶
Prepare a USB stick including the bootable BMC firmware update image.
▶
Ensure that the server has been shut down and disconnected from the
mains, see
"Disconnecting the power cord" on page 40 .
▶
Connect the USB stick containing the BMC firmware to a USB port.
▶
Connect the server to the mains while pushing the ID button on the front
panel. Ask a second person to help you if necessary.
▶
Ensure that the Global Error indicator and the ID indicator are flashing to
indicate that the server is entering the iRMC recovery state.
▶
Press the Power On/Off button. The system will start the POST process.
▶
During POST, press [F12] and select the connected USB stick as boot
device. The system will detect the USB stick.
Basic software procedures
70 Upgrade and Maintenance Manual GX2570 M6