manualshive.com logo in svg

Fujitsu PRIMERGY GX2570 M6, Upgrade And Maintenance Manual, Page: 17 / 283

Share
Download
Fujitsu PRIMERGY GX2570 M6 Upgrade And Maintenance Manual Download Page 17

2

Before you start

2.1

Basic information

2.1.1

Proceeding

Before you start any upgrade or maintenance task, proceed as follows:

▶

Carefully read the safety instructions, see 

"Important information" on 

page 25

.

▶

Make sure that all necessary manuals are available, see 

"Documentation 

overview" on page 22

. Print the PDF files if required.

▶

Make yourself familiar with the procedure categories, see 

"Classification of 

procedures" on page 18

.

▶

Ensure that all required tools are available, see 

"Tools you need at hand" on 

page 22

.

2.1.2

Installing optional components

The operating manual of your server gives an introduction to server features
and provides an overview of available hardware options.

For the latest information on hardware options, see the hardware
configurator of your server, available online at the following address:

https://www.fujitsu.com/emeia/products/computing/servers/primergy/
index.html

For Japan:

https://www.fujitsu.com/jp/products/computing/servers/primergy/

Please contact your local Fujitsu customer service partner for details on how to
order expansion kits or spare parts.

GX2570 M6

Upgrade and Maintenance Manual

17

Summary of Contents for PRIMERGY GX2570 M6




























































































































































































































































































Reviews:

No comments