manualshive.com logo in svg

Fujitsu PRIMERGY GX2570 M6, Upgrade And Maintenance Manual, Page: 246 / 283

Share
Download
Fujitsu PRIMERGY GX2570 M6 Upgrade And Maintenance Manual Download Page 246

▶

BIOS settings are automatically reloaded. Time and date must be set
manually.

16.4

System board

16.4.1

Replacing the system board

Field Replaceable Unit
(FRU)

Hardware: 50 minutes

Software: 10 minutes

Tools:

Replacing the system board:

– Phillips PH2 / (+) No. 2 screw driver

– Magnifying glass for inspecting CPU socket springs

(recommended)

Note on network settings recovery

When replacing the system board, network configuration settings in the
system will be lost and replaced by default values. This applies to all
static IP address and LAN teaming configurations.

Ensure to note down your current network settings before replacing the
system board.

Preliminary steps

▶

"Locating the defective server" on page 39

.

▶

"Shutting down the server" on page 40

.

▶

"Disconnecting the power cord" on page 40

.

▶

Disconnect all external cables.

▶

"Getting access to the component" on page 41

.

▶

"Removing the CPU node" on page 49

.

▶

"Removing the air duct" on page 62

.

System board and components

246

Upgrade and Maintenance Manual

GX2570 M6

Summary of Contents for PRIMERGY GX2570 M6




























































































































































































































































































Reviews:

No comments