Econel 100
Operating Manual
37
Preparation for Use and Operation
Cleaning the Server
5.3.3
Configuration without ServerStart
Configuring the RAID Controller
Configure the corresponding RAID controller as described in the
section
“Configuring the SATA RAID Controller” on page 36
.
Installing the Operating System
Ê
Insert the installation floppy disk and the CD for the operating system you
want to install.
Ê
Reboot the server.
Ê
Follow the instructions on the screen and in the manual for the operating
system.
If your server is equipped with a RAID controller, please read how to install the
desired operating system in the related manual.
5.4
Cleaning the Server
V
CAUTION!
Switch the server off and pull the power plug out of the grounded-contact
power socket.
Do not clean any interior parts yourself; leave this job to a service
technician.
Do not use any cleaning agents that contain abrasives or may corrode
plastic.
Ensure that no liquid enters the system. Ensure that the ventilation areas
of the server and the monitor are clear.
Clean the keyboard and the mouse with a disinfecting cloth.
Wipe the server and monitor casing with a dry cloth. If particularly dirty, use a
cloth that has been moistened in a mild domestic detergent and then carefully
wrung out.
